There is more than one way for a roof to be built. As architectural architecture is constrained only by the imagination, only the laws of physics and the materials available restrict roofing designs. Indeed it is possible that any detailed discussion of the different styles of modern buildings will fill a dictionary; but some of the more common roof designs will be discussed in this article. You’ll most likely notice the theme of the roof in your house, unless it’s anything particularly unusual.If you wish to learn more about this, visit Roofing-Overson Roofing.
Gable by Gable
The gable roof, possibly the simplest style, is believed to come from the first roofs, which were simple stick or log structures leaning at angles to form a triangular hut. In the middle of a house, a gable features two sloping sides that meet, where both sides slope at an even angle. It can therefore, appear as a symmetrical triangle over a building’s body. In North America, these are the most common type.
Slightly more complex than a gable is a cross gabled roof, but only because it has two gable parts that intersect at a right angle. The ridges formed by each gable roof should be perpendicular to each other and the height, length, and pitch of each gable in a cross gabled roof should also be equal, just as the slopes on a gable are identical.
Another typical type is the basic hip roof, as it is often called. The hip roof has two slopes at equal angles which meet in the centre of the house, similar to a gabled roof. The ends are not smooth, though. Instead, four sloped sides have a hip roof such that all external walls are the same height. Gable roofs benefit from basic hip roofs as they offer greater protection in regions of strong winds or hurricanes.
The Thigh pyramid
A pyramid hip roof is somewhat similar to a simple hip, as the name implies, with the additional addition of four equal triangular sides meeting in the middle.
Hipped by Cross
The design features of a cross gabled roof are followed by a cross hipped roof, but with the additional design features of a hipped one. With all external walls at the same height, a cross-hipped roof suits on a home. It’s as though you had taken two hipped-roofed houses and added them perpendicularly. As a valley, the portion where the two roofs intersect is known.
The Mansard style originated in France in the 15th century and is named after the architect who popularized the roof, Francois Mansart. There are two slightly different slopes on either side of the Mansard roof; the lower portion of the roof is almost level and has only a minor slope, while the upper section is steeper. During the Victorian era of architecture, this type of roof was also prominent and is commonly seen across Europe.
A saltbox is basically a gable roof that is asymmetrical. The roof features two slopes that intersect above the roof at some point, but the slopes need not be the same angle and height.
A gambrel roof on a typical barn is what you hope to see. This is something of a cross between a gable and a Mansard roof with two symmetrical faces, as well as two separate slopes on either side of the roof. The steepest pitch is the lower slope, and it can also be almost vertical, while the top slope is more incremental. The Gambrel features this style on just two sides of the roof, as you would find on a gable, unlike a Mansard roof.
With modern architectural design, flat roofs are becoming ever more common. With just a minor slope to facilitate water drainage, flats need less material to create, so they are more economical. A flat roof, however, usually requires more regular maintenance.