Titan garage doors surrey Consoles

If your garage door has been running noisily, bouncing on its track, or sagging on one side, do not wait any longer to figure out what is wrong. Keeping an eye on these basic garage door repairs will increase the lifespan of the door as well as help you avoid larger problems in the future.

Identifying problem areas
With the door closed, run a thorough examination of the metal tracks inside your garage. Check for loose hardware along the length of each track, watching for loose bolts or screws on mounting brackets and spring mounts in particular. If your door rolls up in sections, replace any damaged hinges or tighten the screws on loose ones. Roll-up doors have a vertical track which will also need to be examined once the door is open and out of the way.You can get additional information at Titan garage doors surrey, BC.

If your hinges are loose but not broken, the screw hole may be enlarged or stripped. You can replace the screw with a longer one glued to a hollow fiber plug, which you can find at any hardware store. You can also use wood glue or filler to repair tiny cracks in the wood near the hinges. If you notice major cracks or breaks, you may need to replace the wood, re-attach the hinges, and then realign the tracks.

As you examine the tracks, keep an eye out for dents and crimps in the metal. Damaged areas can be easily worked out by using a rubber mallet, or with a hammer on a small block of wood held on the dent. If the tracks are badly dented or damaged in several places, however, it is better to replace them entirely.

Cleaning
The tracks along the garage wall accumulate dirt and grease over time, which can harden and cause operational problems. Using a concentrated household cleaner, clean the tracks and rollers thoroughly. Do not leave them damp to air-dry; instead, use a clean towel or scrap rag to dry all components completely.

If your door has developed a particularly noisy ascent or descent, consider a light application of lubricant, silicone spray, or powder. These can be applied to the tracks, rollers, and pulleys.

Garage door realigning repair
If your metal tracks are loose or have been hit, your door will not operate quietly or smoothly. To avoid further damage to the tracks or rollers, make adjustments as soon as you notice a potential problem. A garage door which swings up has only horizontal tracks, which should slightly slant down toward the back of your garage. Without completing removing the mounting brackets, you can loosen the bolts or screws and carefully tap the tracks back into position. Garage doors that roll up from vertical to horizontal tracks require more work to ensure all parts align equally and accurately.

Contact Info

Titan garage doors surrey
6486 140 St, Surrey, BC V3W 9H9
16042458863

All About Garage Door Openers

Getting a garage means you can go to bed at night without thinking about leaving your car out in the open. You don’t have to think about scratches, dust, drops of dew, rain and, most importantly, presents from birds that land directly on your windshield or car roof. Within your garage, you will find your car as you left it there. Getting a garage, though, means another thing as well. It means having to open the door and shut it every time you need to go anywhere. Thankfully, garage door openers have taken care of that little problem.Checkout Titan Garage Doors Coquitlam, BC for more info.

Garage door openers are machines operated by motors that open and shut the doors in the garage. Some can be manually controlled by switches mounted within the garage and others can be operated from within the car by remote controls. The remote control can also activate the opener automatically and the door opens when your car enters the driveway, or you can open it by pressing the button on the remote.

All garage door openers work on a particular driving system that provides the mechanism by which they are controlled. There are three basic types of driving systems and before making a decision on which one to opt for, you should consider and compare all three of these.

By raising it, a metal chain operates the opening and closing of the door in a chain drive system. Chain-operated garage door openers, however, are very noisy and can make a lot of rackets as you open and close the door. Belt-powered ones are driven by flexible belts that work smoothly and do not create a lot of noise. Screw-driven openers work along a steel rod opening and closing mechanism of the third type. These can also be very loud, though, because of the metallic nature of the rod, and therefore distracting.

It is also critical that you choose the type of driving system for the garage door opener according to the garage location. Even a noisy opener would not be a bad idea if the garage is situated away from the bedrooms or the master bedroom. However, you can go for the least noisy ones to save yourself and your family the noise if your bedroom is above or adjacent to the garage.

Motors with different power ranges are operated by these door openers. By testing its lifting speed and the electrical power it absorbs, you can conduct research on the type of motor you want. In the event of a power outage, most motors have a battery operated backup. You wouldn’t have to think about getting the door stuck in the middle of the road or not being able to open it at all.

CONTACT  INFO :

Titan Garage Doors Coquitlam
3003-3102 Windsor Gate, Coquitlam, BC V3B 0J3
Phone No. : 604-313-0108