How To Save A Water-Damaged iPhone-Brief Notes

Accidents do occur. Even if you take every precaution, accidents will happen when you least expect them. When using a mobile phone, it’s no different. When using a tablet, you can drop it, thump it, or sit on it by mistake. Or, even worse, you might get it wet and ruin the whole thing. The good news is that there are ways to save a wet mobile phone, and here are the steps you can take if your phone gets wet by mistake.

Get it out of the water as soon as possible. Of course, the first order of business is to retrieve the phone from the bath. Yes, you’ll be stunned when your pricey iPhone or Blackberry falls into the sea, but snap out of it and get it out as soon as possible! If it has been spilled on, wipe it dry with a clean cloth to clear the liquid until it seeps into the device’s mechanism. Feel free to find more information at https://www.themobilerepair.com/how-to-save-a-water-damaged-iphone/

Switch off the phone as soon as possible. Turning off the phone is just as crucial as getting it out of the water. Make sure you don’t have the phone on for more than a few seconds or minutes before turning it off. Note that if the phone’s power is switched on, water will do more harm.

Determine the type of liquid in which the phone has been submerged. Is it new or salt water? Take the phone apart to remove the SIM card, battery, and screen if it has been soaked or drenched in salt water. Rinse the remaining parts of the phone with fresh water to remove any salt residue that might cause the phone to corrode quickly. Then, after rinsing, grab a towel and quickly dry the handset. To absorb excess water, place the phone on top of a towel. To speed up the drying process, dab the various phone parts with a towel.

Another choice is to put the pieces of the phone in a bowl and then fill it with rice grains, which will absorb the moisture from the phone parts. After every hour, repeat the procedure with a new bowl of dry rice. Once the phone has dried completely, put it back together and try turning it on. If it still won’t work properly, turn it off and take it to a licenced repair shop right away.