Commercial Roofing: Common Causes of Leaks

Roof leaks can vary in size from a small drip that leaves water spots on ceiling tiles to a torrent of water that destroys drywall and wood flooring in a matter of minutes. Most leaks are small at first, but stormy weather and poor roof maintenance can quickly magnify them. If your building has a roof leak, you can contact a commercial roofing company to inspect it for the following issues: You can learn more at look at this site.

Equipment that has been installed incorrectly

Satellite dishes, advertising signs, and other equipment that needs to be above ground level can all be found on a rooftop. Some building owners, on the other hand, mount the equipment by screwing it into the roof membrane. Even if the seal around the screws appears to be secure, water will seep through and clog the roof deck underneath. The equipment is removed and the damaged portion is resealed to fix the problem.

Screw Holes That Have Been Expanded

Screw holes on panel roofs extend around the screws that keep the panels in place due to improper installation and weather damage. Even the tiniest expansion allows water to pass through the membrane, while a massive expansion causes the panels to blow away. If your building’s panels haven’t been inspected in a while, schedule an inspection with a commercial roofing company as soon as possible.

It’s stinging

Blistering is a common cause of commercial roof leaks in the city’s humid subtropical climate. Blistering is a common side effect of improper installation and dry lapping, and it gets worse in hot weather. If the blisters become big enough, they can burst, preventing the roof from deflecting water. Small blisters are rarely a problem, and they rarely need to be repaired.

Loose Flashing is a term used to describe a form of flashing

Flashing fills the space between a roof’s edge and protrusions like vents and air conditioning ducts. Flashing may lose its seal over time, allowing water to easily enter the deck and ceiling beneath. Water damage to the ceiling area just under a fan, chimney, or other form of protrusion is a telltale sign of loose flashing. The problem is typically simple to fix, but if left unattended, it can cause serious harm.